General Maintenance of Ducted System (Limited Special)

General Maintenance of Ducted System (Limited Special)

$150.00
In Stock

Achieve incredibly cheap-to-run air conditioning.

A ducted system air conditioner that is regularly serviced and maintained will outperform a poorly maintained system and cost you substantially less to use. 

A poor (or non-existent) maintenance will keep your system dirty and unhealthy - is your ducted system strong out of some vents and weak from others? They should be all even.

Regular maintenance gives you the piece of mind of knowing that it can be relied upon and will constantly work at its optimum capacity.

Ensure your ducted system is not costing you more than it should and that you satisfy warranty conditions, manufacturers do advise that maintenance be carried out regularly.

A general maintenance (limited special) includes the following (if applicable):

Clean return air filter(s), check condition of interconnecting cable and pipe, check unit for the infestation of rodents or insects, check duct work, check drain & drain pan, check electrical connections, check refrigerant pressures, check motor currents, check voltages, check isolator.

 

Valid for (1) one regular installed* ducted air conditioner in Sydney region. 
*regular installed is under Proven's discretion.

Achieve incredibly cheap-to-run air conditioning.

A ducted system air conditioner that is regularly serviced and maintained will outperform a poorly maintained system and cost you substantially less to use. 

A poor (or non-existent) maintenance will keep your system dirty and unhealthy - is your ducted system strong out of some vents and weak from others? They should be all even.

Regular maintenance gives you the piece of mind of knowing that it can be relied upon and will constantly work at its optimum capacity.

Ensure your ducted system is not costing you more than it should and that you satisfy warranty conditions, manufacturers do advise that maintenance be carried out regularly.

A general maintenance (limited special) includes the following (if applicable):

Clean return air filter(s), check condition of interconnecting cable and pipe, check unit for the infestation of rodents or insects, check duct work, check drain & drain pan, check electrical connections, check refrigerant pressures, check motor currents, check voltages, check isolator.

 

Valid for (1) one regular installed* ducted air conditioner in Sydney region. 
*regular installed is under Proven's discretion.

Find The Right Size A/C For Your Room

Finding the right air conditioner depends on numerous factors including room size, ceiling height, insulation, size of windows, level of sunlight and more. Below is an approximation of required cooling and heating capacities for different room sizes.

If you wish to purchase online now to take advantage of a limited time sale, but are unable to determine the correct size using the guides below, simply mention you would like a room size assessment at checkout - if a different size is needed we will happily assist with up-sizing / down-sizing*

 

The cooling and heating capacity of an air conditioner is measured in kilowatts (kW).

2.5 kW RANGE

SUITABLE FOR ROOMS APPROX 10 – 25 SQ METERS

Bedrooms, Studys, Small lounges, Small kitchens, Small offices.

3.5kW RANGE

SUITABLE FOR ROOMS APPROX 25 – 35 SQ METERS

Bedrooms, Bedrooms with ensuites, Studys, Small lounges, Mid-sized kitchens, Small rooms with high ceilings, Offices.

5 – 6kW RANGE

SUITABLE FOR ROOMS APPROX 35 – 60 SQ METERS

Large bedrooms, Mid-size lounges, Large kitchens, Mid-sized rooms with high ceilings, Medium offices.


7 – 8kW RANGE

SUITABLE FOR ROOMS APPROX 60 – 80 SQ METERS

Large lounges, Large open plan areas, Small shops, Large offices.

 

Room Size m2 Capacity - Cooling (C)/Heating (H)
3.0m x 3.0m = 9m2 2.5KW(C)/3.2KW(H)
5.0m x 5.0m = 25m2 3.5kw(C)/3.7KW - 4.3KW (H)
5.5m x 5.5m = 30m2 3.5kw(c)/3.7KW(H) - 5.0KW(C)/6.0KW(H)
6.3m x 6.3m = 40m2 5.0KW(C)/6.0KW(H) - 6.0KW(C)/7.2KW(H)
6.7m x 6.7m = 45m2 6.0KW(C)/7.2KW(H) - 7.1KW(C)/8.0KW(H)
7.1m x 7.1m = 50m2 7.1KW(C)/8.0KW(H) - 8.0KW(C)/9.0KW(H)
7.7m x 7.7m = 55m2 8.0KW(C)/9.0KW(H) - 9.2KW(C)/10.0KW(H)

* This table is only a general guide to the heating and cooling capacities of air conditioners across a range of brands that takes into consideration the spectrum of standard environmental conditions of various room sizes. 

For more complex installations a heat load calculation should be performed. A heat load calculation comprises of many factors such as size of area, size of windows, roof type, building material, whether there is insulation, external shading or internal shading etc. Incorrect sizing will mean inadequate cooling/heating.

Call 1300 776 247 for a Proven Air specialist to find the air conditioner most suitable for your room or rooms.